
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Luftöl Separator 1092081300
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate…
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| Höhe | 620 mm |
|---|---|
| Außendurchmesser | 467 mm |
| Flange Outer Diameter | 600 mm |
| Filtrationsbewertung | 0,01μm |
| Gewicht | 8 kg |
1092081300 (also written as 1092-0813-00) is a high-efficiency oil-gas separator filter element specially designed for oil-injected screw air compressors. It is used to thoroughly separate lubricating oil mist from clean gas in compressed air, ensuring air quality and the economic efficiency of lubricating oil circulation.
Kernleistungsvorteile
• High-precision oil-gas separation.
Adopts imported multi-layer composite superfine glassfiber filter media with a filtration accuracy of 0.01 – 1 μm and a separation efficiency as high as 99.9% – 99.99%.
• Extremely low oil content in exhaust gas.
The residual oil content of exhaust gas is strictly controlled at ≤ 3 ppm, which effectively reduces lubricating oil loss and prevents oil contamination of downstream pneumatic equipment and precision gas-consuming terminals.
• Niederdruckabfall und energiesparendes Design.
The optimized folded and wound structure provides sufficient dust holding capacity and flow area, with an initial pressure difference ≤ 0.02 MPa, greatly cutting down the energy consumption of the air compressor.
• High temperature, high pressure and corrosion resistance.
The inner and outer frames adopt high-strength rust-proof galvanized steel perforated mesh, matched with high-temperature-resistant special epoxy resin end cap adhesive. It can operate stably for a long time under normal working conditions of -10℃ to +100℃ (up to 120℃ instantaneously) and 0.7 – 1.3 MPa.
• Anti-static safety structure.
The built-in flange version is equipped with professional anti-static diversion metal pins (grounding devices) to effectively discharge static electricity generated by high-speed friction of oil and gas, eliminating the risk of static ignition inside the oil-gas barrel.
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for 1092081300 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming 1092081300 or comparing it with another reference? Use these selection resources before ordering.



