
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Air Oil Separator Filter 1092300919
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
1092300919 is a high-performance air/oil separator filter developed specifically for medium and large oil-injected screw air compressors (such as the GA55, GA75 and GA90 series). Installed inside…
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| Höhe | 280 mm |
|---|---|
| Außendurchmesser | 220 mm |
| Innendurchmesser | 157 mm |
| Flange Outer Diameter | 364 mm |
| Filtrationsbewertung | 3 μm |
| Gewicht | 5.25 kg |
| OEM / Querverweis | 4930252521,OT5174,SAO54054 |
| Applicable Device Models | GA 55,GA 55+,GA 55 PLUS,GA 75,GA 75+,GA 90 |
1092300919 is a high-performance air/oil separator filter developed specifically for medium and large oil-injected screw air compressors (such as the GA55, GA75 and GA90 series). Installed inside the air compressor air-oil tank, this component is responsible for efficiently separating compressed air from lubricating oil. It directly determines the oil content of the final compressed air, the energy consumption of the machine and the operational stability of the whole unit.
Kernfunktionen und Arbeitsgrundsätze
• Depth Coalescence Separation.
The high-temperature and high-pressure oil-gas mixture discharged by the compressor enters the oil-gas tank, undergoes primary separation, and then passes through the 1092300919 filter element. The multi-layer ultra-fine glass fibers inside the filter element adopt a deep winding process, which can intercept micron-sized oil mist particles below 3 microns and coalesce them into large oil droplets.
• Lubricating Oil Circulation and Recovery.
The coalesced oil droplets sink to the bottom of the filter element under gravity, and are then pumped back to the main compression chamber through the oil return pipe for recycling, greatly reducing lubricating oil consumption.
• Delivery of Clean Compressed Air.
The filtered clean air (oil content controlled within 1–3 ppm) is delivered to the post-treatment system and gas consumption points via the minimum pressure valve, effectively protecting downstream precision pneumatic components and production processes.
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for 1092300919 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming 1092300919 or comparing it with another reference? Use these selection resources before ordering.



