
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Air/Oil Separator 02250214-961
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
02250214-961 is a high-efficiency built-in oil-gas separator filter cartridge specially designed for high-power industrial oil-injected screw air compressors . It is mainly used to thoroughly separat
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| Höhe | 381 mm |
|---|---|
| Außendurchmesser | 349.3 mm |
| Innendurchmesser | 158.8 mm |
| Gewicht | 7.25 kg |
| Filtrationsbewertung | 0,1 mm |
| OEM / Querverweis | KV590-024P,FLK16-03299 |
02250214-961 is a high-efficiency built-in oil-gas separator filter cartridge specially designed for high-power industrial oil-injected screw air compressors . It is mainly used to thoroughly separate lubricating oil from compressed air, ensuring the safety of downstream processing equipment and the cleanliness of air consumption terminals.
Kerneigenschaften des Produkts
• High-precision Deep Coalescing Filtration:
Adopts multi-layer imported ultra-fine glass fiber composite filter media, which can efficiently capture oil mist aerosols as small as 0.1 micrometers (μm), and keep the residual oil content at the compressed air outlet within 1 – 3 ppm.
• Low Resistance and Energy-saving Design:
The optimized folded and wrapped structure provides a large dust holding area while maintaining the initial operating pressure differential at approximately 0.15 – 0.25 bar, effectively reducing the power consumption of the air compressor.
• Anti-static Safety Protection:
The top flange sealing gasket comes with standard Grounding Staples to ensure an equipotential connection between the filter element and the oil-gas separator housing, eliminating the risk of static sparks generated by friction of high-speed airflow.
• High-strength Pressure-resistant Structure:
Both the inner and outer layers are equipped with high-strength galvanized/stainless steel perforated support mesh cylinders and heavy-duty metal end caps. It can withstand pressure shocks from frequent loading and unloading as well as high-temperature lubricating oil environments, and is not prone to deformation or breakdown.
Scope of Application and Installation Method
• Anwendbare Modelle:
Widely compatible with Sullair SN series (such as SN55, SN75, SN7509S and other 75–100 HP models) and industrial screw air compressors of the same class.
• Installation Type:
Built-in flange mounting (installed inside the oil-gas separator tank, corresponding repair kit part number: 02250218-061).
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for 02250214-961 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming 02250214-961 or comparing it with another reference? Use these selection resources before ordering.



