
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Air/Oil Separator OT 4373
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in…
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| Höhe | 256 mm |
|---|---|
| Außendurchmesser | 212.8 mm |
| Innendurchmesser | 149.4 mm |
| Gewicht | 3.59 kg |
| Flange Outer Diameter | 300 mm |
| Filtrationsbewertung | 0,1 μm |
| OEM / Querverweis | 1614.4373.00,1614437300,2911.0015.00,4900252131,P525530,DC 3015 |
OT4373 is an external flange-type oil-gas separator filter element specially designed for screw air compressors. It is mainly used to accurately intercept and recover lubricating oil mist in compressed air, ensuring efficient equipment operation and clean air supply.
Kernfunktionen und Arbeitsgrundsätze
• Efficient oil-gas separation.
It adopts an Out-In filtration flow direction. When compressed air carrying high-temperature and high-pressure oil mist passes through the filter element, the multi-layer ultra-fine glass fiber coalescing media can capture submicron oil droplets smaller than 0.1 micron.
• Oil coalescence and return.
The intercepted tiny oil droplets gradually coalesce into large oil beads inside the filter media, gather in the groove at the bottom of the filter element under gravity, and are then guided back to the lubrication system of the air compressor through the oil return pipe for recycling, greatly reducing oil consumption.
Structural Design and Quality Characteristics
• High-strength collapse-resistant frame.
Both the inner and outer layers are equipped with high-strength galvanized perforated steel support screens, which can withstand the instantaneous high pressure difference during air compressor startup and high-load operating conditions and prevent deformation or damage of the filter element.
• Safe static-conductive design.
The top flange is standardly fitted with an oil-resistant composite sealing gasket, and built-in metal static-conductive rivets and M8 grounding studs, which can safely conduct away static electricity generated by friction of high-speed airflow and eliminate the risk of static ignition inside the oil-gas tank.
• Low resistance and long service life. The initial operating pressure difference is usually lower than 0.2 bar. While maintaining low energy consumption, the residual oil content in exhaust gas is stably controlled within 1 – 3 ppm.
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Kreuzreferenz
Referenzinformationen zu diesem Produkt. Kontaktieren Sie uns, wenn Sie Hilfe benötigen, um eine Querverweisnummer zu bestätigen.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for OT 4373 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming OT 4373 or comparing it with another reference? Use these selection resources before ordering.



