
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Oil Separator Element B006700770027
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air…
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| Höhe | 304.8 mm |
|---|---|
| Außendurchmesser | 274.6 mm |
| Innendurchmesser | 200.2 |
| Filtrationsbewertung | 0.01 ~ 0.03 μm |
| Gewicht | 7.72 kg |
| Flange Outer Diameter | 355,6 mm |
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air compressor, it is responsible for deeply intercepting and separating the lubricating oil mist carried in the airflow before the compressed air enters the aftercooler and the gas consumption end, ensuring the cleanliness of downstream compressed air and realizing the recycling of lubricating oil.
Kerneigenschaften des Produkts
• High-precision deep filtration.
Adopting multi-layer superfine fiberglass composite filter media, it can effectively capture oil-aerosol particles at the level of 0.01 ~ 0.03 μm. The filtration efficiency reaches over 99%, ensuring the oil content in exhaust gas is controlled at ≤ 3 ppm.
• Low pressure differential energy-saving design.
The optimized pleated filter layer structure and high-permeability support net greatly reduce air flow resistance, with an initial pressure differential of only ≤ 0.02 MPa (approx. 0.2 bar), helping cut energy consumption loss during the loaded operation of air compressors.
• High-strength explosion-proof and pressure-resistant structure.
The inner and outer protective screens are made of high-strength galvanized carbon steel perforated plates. Combined with oil-resistant high-temperature end caps and special adhesives, it can withstand a maximum working pressure of 10 bar and scouring by high-temperature oil and gas, preventing the filter element from deforming or collapsing under high pressure differential.
• Static dissipation safety protection.
The flange plate is equipped with conductive gaskets or anti-static pins, which can promptly conduct static charges generated by high-speed friction of oil mist to the oil-gas tank shell, eliminating the risk of static sparks in the oil-gas mixed environment.
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for B006700770027 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming B006700770027 or comparing it with another reference? Use these selection resources before ordering.



