
Zuverlässige Filtration beginnt mit verifizierten Spezifikationen.
Luft / Öl Separator KV360-003
Luftkompressorfilterelemente Ersatzelement
Luftkompressorfilterelemente
KV360-003 ist ein eingebautes Luft-/Ölabscheiderelement vom Typ Flansch. Dieses Produkt ist speziell für ölverdichtete Schraubenluftkompressoren entwickelt worden. Als OEM-Äquivalent-Ersatzelement der gleichen Qualität..
Bestellungen werden von unserem Team für Preis, Kompatibilität und Lieferung bestätigt.
Verifizierte Spezifikationen für eine zuverlässige Auswahl.
Bestätigen Sie die Installationsanforderungen anhand der Betriebsanleitung oder der Originaldokumentation.
| OEM / Querverweis | 6.1965.0, 6.2013.0, 6.4024.0,49 000 50 321, 49 000 51 321, 49 004 52 101, 49 004 52 102, 49 004 53 102,P52-5203, P53-0757P52-5203 , P53-0757 |
|---|---|
| Höhe | 450 mm |
| Außendurchmesser | 275 mm |
| Innendurchmesser | 219 mm |
| Gewicht | 8,3 kg |
| Flange Outer Diameter | 328 mm |
| Filtrationsbewertung | 0,1 mm |
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as original filters of many mainstream brands, it is used to efficiently separate lubricating oil mist from compressed air, ensure the clean operation of the pneumatic system and reduce oil consumption.
Strukturelle und materielle Merkmale
• High-quality filter media.
The interior is wound with multiple layers of uniformly graded borosilicate glass microfiber. It features high dust holding capacity and low initial pressure drop (approximately 0.14–0.20 bar), which helps reduce the energy consumption of the air compressor.
• High-strength support structure.
Equipped with high-strength, rust-proof perforated inner and outer metal support screens and galvanized end caps. It can withstand pressure differential shocks up to 5 bar (70 psi) without collapse or deformation.
• Non-porous flange sealing design.
The top flange adopts a non-porous flat flange structure (outer diameter approx. 324–328 mm, total height approx. 450 mm), which is sealed by direct compression against the top cover of the oil-gas separation tank. Two oil-resistant sealing gaskets with conductive metal pins are usually supplied with the unit. They can naturally dissipate static electricity generated during filter operation after installation to ensure equipment safety.
Installationshinweise
Stoppen Sie das System und lassen Sie den Druck vor dem Entfernen frei. Bestätigen Sie die Strömungsrichtung und die Dichtflächen vor der Installation.
Wartung & Ersatz
Ersetzen Sie nach Druckabfall oder Wartungsplan. Prüfung auf Leckagen und Dichtungsschäden.
Vor der Bestellung
Bestätigen Sie Medium, Durchfluss, Druck, Temperatur, Anschluss und verfügbaren Einbauraum.
Kreuzreferenz
Referenzinformationen zu diesem Produkt. Kontaktieren Sie uns, wenn Sie Hilfe benötigen, um eine Querverweisnummer zu bestätigen.
Lieferoptionen
Versand- oder Service Point Pickup. Unser Team bestätigt das beste Arrangement basierend auf Ziel, Gewicht und Vorlaufzeit.
Bestätigt vor dem Versand
Nach Anfrage überprüfen wir Spezifikationen, Preis und Lieferstatus vor Lieferung.
Laufende Unterstützung
Für Spezifikation, Installation oder Qualitätsfragen, halten Sie das Produkt und Bestellinformationen zur Verfügung, wenn Sie uns kontaktieren.
UNTERSUCHUNGSchicken Sie eine Anfrage zu diesem Produkt
Send your requirements for KV360-003 and our selection team will confirm compatibility, price and lead time.
Auswahlressourcen
Need help confirming KV360-003 or comparing it with another reference? Use these selection resources before ordering.



